Inconel 601 Nickel Based tube
Inconel 601 Nickel Based tube is a high-performance nickel-chromium-iron based high-temperature alloy. It is strengthened by adding aluminum (Al) and silicon (Si) to improve its oxidation and carburization resistance. The tube is made by precision rolling or cold drawing. It has excellent mechanical strength and machinability. It is suitable for extreme high-temperature and corrosive environments. Its typical composition is nickel (58%-63%), chromium (21%-25%), iron (the rest), with a small amount of aluminum (1.0%-1.7%) and copper ( Less than or equal to 1.0%).
Inconel 601 Nickel Based tube is widely used in high-temperature corrosive environments. It is used in heat treatment furnace radiant tubes, ethylene cracking furnace tubes, and gas turbine heat exchanger components. It can withstand oxidation and sulfidation corrosion at 1200 degree . In the nuclear power and aerospace fields, it is used for heat-resistant pipes and engine exhaust systems. It has both high strength and oxidation resistance. It is a key material in chemical, energy, and waste gas treatment.
Features of Inconel 601 Nickel Based tube
Excellent high-temperature performance: Inconel 601 Nickel Based tube can work stably for a long time in an oxidizing environment up to 1200 degree . It has better oxidation resistance than ordinary stainless steel.
Inconel 601 Nickel Based tube has significant resistance to sulfidation, nitridation and chloride stress corrosion cracking (Cl-SCC).
Inconel 601 Nickel Based tube still has high strength and creep resistance at high temperatures. Its tensile strength can reach Greater than or equal to 600 MPa (at room temperature).
Inconel 601 Nickel Based tube supports welding and cold forming. But it is necessary to avoid the intermediate temperature sensitization range (500 degree - 800 degree ) to prevent intergranular corrosion.
Applications of Inconel 601 Nickel Based tube
Inconel 601 Nickel Based tube is used in high-temperature parts such as heat treatment furnace radiant tubes and burner nozzles.
Inconel 601 Nickel Based tube is used in ethylene cracking furnace tubes, gas turbine heat exchanger tubes and corrosion-resistant pipes in nuclear power equipment.
Inconel 601 Nickel Based tube is used in the acid gas emission pipes of the waste gas treatment system. It can withstand the corrosion of sulfides and nitrogen oxides.
Inconel 601 Nickel Based tube is used to make engine exhaust system components. It meets the needs of lightweight and high-temperature strength.
|
|
|
|
|
|
ASTM B163 / B167 / B829 / B516 / B517 |
|
|
|
6mm ~ 300mm (customizable) |
Common sizes: 12.7mm, 25.4mm, 50.8mm |
|
|
0.5mm ~ 20mm |
Typical: 1mm, 2mm, 5mm, 10mm |
|
|
1m ~ 12m (custom up to 18m) |
Standard: 6m |
|
|
||
|
|
-200 degree ~ +1200 degree (long-term Less than or equal to 1100 degree ) |
Short-term peak: 1250 degree |
|
|
Greater than or equal to 600 MPa (room temp.) |
|
|
|
Greater than or equal to 240 MPa (room temp.) |
|
|
|
Greater than or equal to 30% |
|
|
|
8.11 g/cm³ |
|
|
|
Ni 58-63%, Cr 21-25%, Fe balance, Al 1.0-1.7% |
Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.
A: 100% full inspection for sure. All unqualified products are discarded.
What is the MOQ of Inconel 601 Nickel Based tube ?
A: around 7-20 days which depends on the quantity and production.
A: from order placed to cargo receiving will take around 10-25 days.
Popularne Tagi: inconel 601 nickel based tube, China inconel 601 nickel based tube suppliers, factory
